Hasbro

This is the out of production and hard to find Star Wars ARC-170 STARFIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model has a ~7 wing-span and features an opening cockpit and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear and there is a very minor scuff on the display dome, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Federation TRI-DROID FIGHTER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features rotating wings and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars SNOWSPEEDER from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in diagonal length and features opening cockpit and a display case. MINT in a near MINT sealed box. The box has a small crease on the left-front panel and a small dent on the back-left-top corner, but otherwise is in Excellent condition.

This is the out of production and hard to find Star Wars Boba Fett's version of the SLAVE I from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features pivoting wings, rotating guns and a display case. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Battlestar Galactica GALACTICA from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~7 inches in length and features slide out launch bay arms and a display case. MINT in a near MINT sealed box. The box has a small crease on the left-front panel and some minor edge wear, but otherwise it is in Excellent condition.

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium Ultra line by Hasbro. The pre-painted die-cast model is ~6 inches (15cm) in length and features opening cockpit and a display case. It was produced in limited numbers in 2006 and was the near the end of the Titanium Ultra vehicles. MINT in a near MINT sealed box. The box has extremely minor edge wear, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Desert Skiff from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features an extending plank and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Jabba's Sail Barge from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Vulture Droid from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features a display stand. It was produced in 2005. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars "Hot Rod" Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening canopy and wings, a racing paint-job, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Darth Vader's TIE Advanced X1 Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit and a display stand. This is the "chase" version which was painted white. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars V-Wing Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-out wings and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a minor curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Mace Windu's Purple Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wings, and a display stand. It was produced in 2008. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars General Grievous Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features fold-down landing gear and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Kashyyyk themed AT-RT from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rolling wheels, opening turret hatch, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars AT-AP from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features rotating turrets, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-Wan's red Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Swamp Speeder from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in diameter and features rotating turrets, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Obi-Wan's blue Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features opening cockpit, folding wingflaps, and a display stand. It was produced in 2006. MINT in a near MINT sealed hanging card. The peg hook has a minor curve and some minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars Plo Koon's Jedi Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and diameter and features opening cockpit, removable hyperdrive ring, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the out of production and hard to find Star Wars orange squadron B-Wing Starfighter from the Titanium line by Hasbro. The pre-painted die-cast model is ~3" in length and features folding wingflaps, and a display stand. It was produced in 2007. MINT in a near MINT sealed hanging card. The peg hook has a slight curve and some very minor edge wear and the bubble has some very minor scuffing, but otherwise is in MINT condition.

This is the limited edition and very hard to find Battlestar Galactica Titanium Gift Pack from the Titanium line by Hasbro. The pre-painted die-cast models are ~3" in length and feature a display stand. The set includes the Colonial Raptor, Battlestar Galactica, and Colonial Viper Mark II. It was only distributed at the San Diego Comic-Con in 2007. MINT in a near MINT sealed display box. The window has a minor ding on the top-center panel and the box has some extremely minor edge wear, but...

This is the out of production and very hard to find Star Wars Force FX Darth Maul (single) Red Lightsaber made by Hasbro in 2013. It is seen in the Phantom Menace and features die-cast metal parts, a removable light-up blade and realistic sound effects for power-up, swing, strike and power down. It also has a motion sensor which activates the appropriate sound based on your hand movement. Comes new in a manufacturer sealed box. NOTE: Due to the size and/or weight of this item, shipping options...

This is the out of production and very hard to find Star Wars Action Fleet Jango Fett’s SLAVE I Vehicle made by Hasbro in 2002. It is seen in Attack of the Clones and features opening cockpit, moveable flaps, rotating turrets and a display stand. This was from the last release of the Action Fleet series and was very limited in production. MINT in a near MINT sealed box. The box has some extremely minor corner wear and the window has a small scratch on the back panel and some minor scuffing,...